| Place of Origin: | Jining，Shandong,China |
|---|---|
| Brand Name: | JUSTSOLID |
| Certification: | EU |
| Model Number: | SV-PSN01 series |
| Minimum Order Quantity: | 1ton |
| Price: | 6000CHY/ton |
| Packaging Details: | 25kg/bag 1ton/bag |
| Delivery Time: | 7 days |
| Supply Ability: | 1000ton/day |
| Appearance: | Off-white Or Grey-brown Powder | PH Value: | 3.0±0.5 |
|---|---|---|---|
| Alkali Content: | <1% | Chloride Content: | <0.05% |
| Highlight: | Mine Tunnels Road Soil Stabilizer,Road Soil Stabilizer Instant Powder,Powder Concrete Hardening Agent |
||
Slope support and protection during the construction of mine tunnels using Chinese powder soil solidifying agent to prom
SV-PSN01 Soil Stabilizer (Instant Powder)
Powder Soil Stabilizer for shotcrete
I Product features
① Easy compounding: add water and stir at room temperature to produce liquid curing agent, which is convenient for on-site use；
② Fast dissolution: the speed is about 600 at room temperature, and the dissolution can be completed within 2 hours；
③ High economy: Compared with the finished liquid curing agent, it saves packaging and transportation costs；
④ Good early strength effect: 1 day and 28 days compressive strength, can meet the construction requirements；
⑤ Good antifreeze effect: ready-to-use, avoiding the shortcomings of poor frost resistance of liquid quick-setting agent.
II Physical indicators
| Project | Technical indicators |
| Appearance | Off-white or grey-brown powder |
| PH value | 3.0±0.5 |
| Alkali content | <1% |
| Chloride content | <0.05% |
III How to use
SV-PSN01 soil stabilizer(curing agent), can be compounded into liquid curing agent by adding water at room temperature in proportion, recommended for example:
| Items | Proportiong |
| SV-PSN01curing agent | 45—60% |
| 水Water | 40—55% |
The amount of curing agent after being formulated into a liquid finished product varies with the temperature of the cured soil and the environment, and the adaptability of the cementitious material (such as cement or white ash), and the curing agent dry powder spray curing can be between 3% and 5% according to the cement content; Other projects can be based on about 0.025% of the total amount of solidified soil.
The Soil Stabilizer(curing agent) is pumped and mixed with the cured soil at the nozzle. This product has a certain viscosity, so it is recommended to remove the filter installed on the hose of the curing agent pump to avoid the curing agent cannot be sucked out normally; Be sure to clean the hardener pump before using this product. It is strictly forbidden to mix this product with other quick-setting agents to avoid chemical reactions between the two curing agents and block the quick-curing agent pump.
IV Ingredient introduction: non-toxic, harmless, non-radioactive, non-corrosive, non-flammable, explosive.
V Safety tips: Avoid contact with skin and glasses; In case of contact, rinse with clean water. If splashed in eyes, wash with plenty of water or seek medical attention. Wear a mask and goggles when touching powdered products.
VI Storage conditions: Instant powder should ensure that the inner and outer packaging bags are intact to prevent water absorption and moisture. After being formulated into a liquid, the storage temperature should be greater than 5 °C. Liquid finished products should be stored in plastic/FRP drums. The pH value of this product is weakly acidic and will react chemically with steel material, so iron drum storage should be avoided.
Storage time: Instant powder products can be sealed for 2 years, and can be stored for 3 months after being formulated into liquids. If liquid products are stored for a long time, it is recommended to use simple stirring to eliminate visual micro-delamination.
VII Product packaging: Packed in 25kg or 1000 kg plastic woven bags or ton bags.
