Highlight: | EU soil binder,solid particle powder soil binder,EU soil agglomeration |
---|
Chinese solid particle powder slope binder soil binder soil agglomeration soil loose conditioning agent soil agglomerati
I. Product Overview
SV-NHJ adhesive is a water-soluble organic soil conditioner, which is an artificially synthesized organic compound, which is colorless and odorless after dissolution, and the decomposition products are water, carbon dioxide, nitrogen, etc., which is ecological and environmentally friendly to the environment. Because it has strong sedimentation and flocculation soil particles, it forms a good aggregate structure in the soil, so it constitutes a carrier of anti-erosion and anti-leakage. It can be mainly used for green spraying, afforestation, etc. It has the characteristics of preventing soil loss caused by surface runoff, improving soil permeability, soil and fertilizer conservation, and alleviating and regulating soil water evaporation.
II. the physical and chemical indicators of the product
Appearance: white powder
Acidity and alkalinity: neutral
Environmental protection: eco-friendly
III. Product features
1. Significant soil preservation and loss prevention: improve soil agglomeration and reduce soil loss caused by surface runoff by more than 95%.
2. Water-saving and wall-preserving: increase the porosity of soil aggregates and improve the permeability of soil moisture. It can increase the water wetting permeability of cohesive and compacted soil by 35%-50%; At the same time, the use of sandy land can inhibit water evaporation and prevent infiltration, which is greatly conducive to the effectiveness of rainfall and the utilization rate of irrigation water.
3. Fertilizer protection and pollution prevention: reduce the permeability loss of soil nutrients phosphate and nitrate by more than 85%, improve the utilization rate of fertilizer, reduce the pesticide content of runoff water, and prevent the pollution of rivers and lakes with groundwater.
4. Ecological and environmental protection: non-toxic and harmless, safe and convenient, and low cost.
5. Improve the survival rate of seedlings and transplanting: alleviate the evaporation of soil moisture, reduce the influence of soil and external adverse factors, increase the seedling emergence rate by 35%, and improve the survival rate of plants and tree transplanting.
6. Improve cohesion: greatly reduce the loss of topsoil caused by hydraulic erosion on the slope surface, and form an aggregate structure to stabilize the spraying substrate materials and seeds on the slope, which is conducive to vegetation restoration.
V. Usage and dosage
Dilution water: Local tap water or drinking water can be used.
Dosage of curing agent: According to different soil quality, the general amount of addition is about 2-3 kg per acre, which is determined according to the site situation.
Dilution factor: Prepare water first, put a small amount of reinforcing agent many times, stir to dissolve, and put it frequently according to a small amount of times. Do not add it at one time to prevent the curing agent from agglomerating and being easy to disperse.
Specific use: (flushing, drip irrigation, watering, spraying)
(1) Dilute and dissolve first in proportion to 1:5000 times: ① 1 gram of this product can be mixed with 5 kg of water ;②200 grams of this product can be mixed with 1000 kg of water;
(2) Add 1 ton of water to the container and stir first and then put 200 grams of this product (or add 100 kg of water and stir first and then put 20 grams of this product), put less, put frequently, spread, and constantly put in and stir for more than 20 minutes in order to achieve the purpose of complete dissolution. (Special note: avoid concentrated putting, so as not to flocculate and dissolve).
(3) The water consumption per mu needs to be 6.7 tons of water per mu according to the degree of soil drought, and 6.7 tons of water are needed for 1 cm of water storage depth of 666.7 square meters per mu (20 tons of water are required for paddy fields with a water storage depth of 3 cm (i.e., 1 city inch) per mu)(1 acre=6 mu).
(4) The dissolved liquid is added to the water requirement per mu in a uniform and orderly manner, and then flushed, drip irrigated, watered, and sprayed with water, the larger the proportion of dissolved water, the soil is fully watered, and the faster the effect, the better.