Deep Penetration Concrete Stabilizer Crystallization Concrete Drying Agent

Chinese liquid concrete sealing and curing agent, deep penetration, crystallization, penetration, sealing, enhancing wea

SV-PSM curing agent

Non surface film-forming, deep penetration crystallization, penetration sealing, enhanced wear resistance, chemical corrosion resistance and aging resistance

1. Product Introduction

SV-PSM curing agent is a nano-scale waterborne inorganic concrete sealing curing agent, formulated by special technology. Through strong permeability and chemical components in concrete and cement floor chemical reaction, in the ground 3-9 mm three-dimensional space to form an overall network distribution and solidification, so as to densify the concrete, in the overall surface strength, wear resistance, impermeability, dust, slip and aging resistance of concrete to show excellent quality, prolong the service life of concrete.

2. Product features

Concrete sealing curing agent is a water-based compound, which does not contain formaldehyde, heavy metals, non-toxic, odorless, non-flammable, TVOC is far lower than the national standard.

3. Scope of Application

concrete flooring; terrazzo floor ; Emery floor ; Cement floor; Hard floors such as epoxy floors.

4. Product advantages

Hard and wear-resistant; Effective sealing; Thoroughly dustproof; Good aging resistance; Good acid and alkali resistance; Bright and non-slip; Durable; Green ; Strong penetration; No alkali return, no whitish.

5. How to Use

Clean the floor first, or with water. In the absence of open water: the product and water (non-alkaline water) are diluted 1:8-1:9, depending on the situation, taking the new floor or wall as an example, to about 0.3-0.35kg/㎡ dosage spray the product on the ground or wall, pay attention to observe the ground or wall after spraying the curing agent, if there is a place where it accumulates or dries thoroughly, use dust to push evenly or properly supplement the liquid to ensure that the curing agent on the floor penetrates evenly.

The effect of mopping is more significant during ground construction, moisturizing for 30-40 minutes each time; After drying, a second construction is carried out. Depending on the intensity requirements of each time, the operation can be repeated or repeated.

The wall is constructed by a combination of horizontal spraying and longitudinal spraying.

6. Precautions

6.1 It is best to work outdoors in the afternoon to prevent the sun from drying too quickly at noon.

6.2 According to the strength of different grounds, the soaking material process can be repeated many times.

7. Packaging and Storage

Packing: 25kg/bag ,1ton/bag or customized according to customer needs.

Storage: Store in a cool, dry place with a shelf life of 12 months.